Cold saws from Scotchman® Industries
Manual and semi-automatic coldsaws have a double self-centering vise, which assures burr-free cuts.

Cold Saws:      Home     275 Series     350 Series     350 NF Series       350 SA Series     315 HFA Series     315 RFA Series     Contact


Scotchman® circular cold saws produce high quality cuts and maximize your cutting capacity. Our cold saws are designed to cut larger profiles than our competitor when using the same size blade. This is achieved by placing the material to be cut underneath the blade instead of in front of it. Our cold saws utilize a double clamping system that holds the material on both sides of the blade to produce clean, burr-free cuts, eliminating the cost of secondary operations.

These Scotchman ® cold saws use a 14" blade and have the capacity to saw up to 4-7/8" tube or thick wall pipe. If your application requires sawing maximum capacity material or harder alloy material, we recommend the power down-feed model.

    CPO 350 SERIES -       350       350 PK       350 PKPD
Manual Saw CPO 350
  • Manual clamp for material vise
  • Operator controlled trigger switch

Manual Saw with Power
Clamp CPO 350 PK
  • Air operated clamp for material vise
  • Operator controlled trigger switch
 Semi-Automatic Saw CPO 350 PKPD
  • Air operated clamp for material vise
  • Pneumatic operated power down feed with electric controls
  • Separate feed controls for rate and pressure
  • Emergency stop button


Material Clamp
Automatic Saw		 Control Panel

    Standard Equipment and Features of our Cold Saws
  • Double Self-Centering Vise Assures Burr-Free Cuts
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Miter Locking Device Stops at 45° Left, Straight 90 degrees, and 45 degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Double Reduction, Hardened and Ground Worm and Wheel Gear Box
  • Worm Wheel of top Quality Bronze
  • 7 Gallon Coolant Tank with Pump
  • 30" Material Length Stop
  • One 12-½" Diameter (315 mm) HSS Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt/3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • American Made
  • Completely assembled ready for operation
 
    Maximum Capacities
Tubing
  Round
  Square
  Rectangle
Solid
  Round
  Square		 90 Degree
  4-7/8"
  4-½" x 4-½"
  5-½" x 4"
90 Degree
  2"
  2" x 2"		 45 Degree
  4-3/8"
  4" x 4"
  4" x 4"
45 Degree
  1-¾"
  1-¾" x 1-¾"


    Specifications
  • Cutting speeds (must specify when ordering):
LT (Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe
  • LT 22/44 rpm
         Motor rate:
             Low rpm 2 hp
             High rpm 2.7 hp
  • LT variable speed drive 12 to 82 rpm
         Motor rate:
             Low rpm 5 hp
HT (High Turn) designed for thin wall tube and non-ferrous material
  • HT 44/88 rpm
         Motor Rate:
             Low rpm 2 hp
             High rpm 2.7 hp    
  • HT variable speed drive 24 to 208 rpm
         Motor Rate:   5 hp    
SS (Single Speed) designed for 220 V 1 ph applications
  • SS 44 rpm
         Motor Rate:   1.5 hp
  • Factory wired. Specify 230 3 PH, 460 3 PH or 575 volt 3 PH 60 hz or 220 1 PH (SS model only)
  • Maximum diameter blade - 14" (350mm)
  • Arbor bore - 1-9/16" (40mm)
  • Pin spacing - 4/12/64
  • Width - 21-7/8"
  • Depth - 43-½"
  • Height - (not including feed handle) 56-¼"
  • Height - (from floor to vise) 37-7/16"
  • Shipping weight - 675 lbs.

If you need more information about our cold saws please contact Scotchman®.


Made in the U.S.A. Scotchman® Industries, Inc.
180 East Highway 14, P.O. Box 850     Philip, SD 57567-0850
Phone: 605.859.2542     Fax: 605.859.2499
Toll Free: 800.843.8844     Fax: 800.843.5545
Home | Metal Cutting 275 | Cold Saws 350 | Circular Saws 350 NF | Column Cold Saw 350 SA
Circular Cold Saw 315 HFA | Automatic Circular Saws 315 RFA | Privacy Statement | Contact
To see additional products, hydraulic ironworkers, band saws, advanced measuring systems and other metal fabricating equipment, go to scotchman.com. This site created and maintained By American Web Page, L.L.C. (www.awpg.com).
Copyright © 2002 - 2008. All Rights Reserved.