The Column Cold Saw from Scotchman® Industries
produces the highest quality cuts in solid or heavy pieces.

Cold Saws:      Home     275 Series     350 Series     350 NF Series       350 SA Series     315 HFA Series     315 RFA Series     Contact


Scotchman's® CLM 350 SA semi-automatic column circular cold saw is a heavy, robust machine for the toughest jobs! This column cold saw, with its rigid column design produces the highest quality cuts in solid or hardened alloy materials with minimal vibration. This economical cold saw has greater mitering ability because only the gear box on the head pivots and not the whole head or column. Our column cold saw has a true hydraulic clamp and feed system with its own hydraulic pump for better feed control.

    CPO 350 SA SERIES -       CLM 350 SA


CLM 350 SA
Column 14" Semi-automatic Saw
  • Hydraulic operated power clamp for material vise
  • Hydraulic operated power down feed
  • Hydraulic feed pressure reducing valve
  • Emergency stop button

CLM 350 SA
           For closer details



Material Clamp
Automatic Saw		 Control Panel

    Standard Equipment and Features of our Column Coldsaws
  • Rigid Column Design
  • Hydraulic Operated Vise with Anti-Burr Device
  • Hydraulic Operated Power Down Feed
  • Hydraulic Feed Pressure Reducing Valve
  • Head Miters 45 degrees
  • Two Cutting Speeds:
    • LT (low turn) = 12 RPM and 25 RPM
    • HT (high turn) = 25 RPM and 50 RPM
  • Electric Limit Switches for Stroke Setting
  • Electric Foot Pedal
  • Emergency Stop Button
  • 30" Material Length Stop
  • Steel Stand
  • Five Gallon Coolant System with Chip Collection Tray
  • Way Lubrication System
  • One 12 ½" diameter (31.5 mm) High Speed Steel Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt /3 Phase Electrics (must specify voltage)
  • Two-year Warranty: (Parts Only)
    Exception: One-year Warranty on Hydraulic & Electrical Parts
  • Made in USA
 
    Maximum Capacities
Tubing
  Round
  Square
  Rectangle
Solid
  Round
  Square		 90 Degree
  4-½"
  4" x 4"
  6" x 4"
90 Degree
  4"
  4" x 4"		 45 Degree
  4"
  4" x 4"
  5" x 4"
45 Degree
  3"
  3" x 3"


    Specifications
  • Two Cutting Speeds:
    • LT (low turn) = 15 RPM and 30 RPM
      designed for solid mild steel, solid stainless steel & thick wall pipe
    • HT (high turn) = 30 RPM and 60 RPM
      designed for thin wall tube and non-ferrous material
  • Motor rate:
             Low rpm 2.5 hp
             High rpm 3.3 hp
  • Blade motor - 1.9 kW and 2.5 kW
  • Hydraulic motor - 1.0 kW
  • Factory wired. Specify 220 3ph or 440 3 ph 60 hz
  • Maximum diameter blade - 14" (350 mm)
  • Arbor bore - 1-9/16" (40 mm)
  • Vise opening - 6-¾" (170 mm)
  • Pin spacing - 4/12/64
  • Width - 36"
  • Depth - 42"
  • Height - 78"
  • Shipping weight - 1,100 lbs.

Contact Scotchman® for a free in-house demonstration of our column cold saws.


Made in the U.S.A. Scotchman® Industries, Inc.
180 East Highway 14, P.O. Box 850     Philip, SD 57567-0850
Phone: 605.859.2542     Fax: 605.859.2499
Toll Free: 800.843.8844     Fax: 800.843.5545
Home | Metal Cutting 275 | Cold Saws 350 | Circular Saws 350 NF | Column Cold Saw 350 SA
Circular Cold Saw 315 HFA | Automatic Circular Saws 315 RFA | Privacy Statement | Contact
To see additional products, hydraulic ironworkers, band saws, advanced measuring systems and other metal fabricating equipment, go to scotchman.com. This site created and maintained By American Web Page, L.L.C. (www.awpg.com).
Copyright © 2002 - 2008. All Rights Reserved.