Metal Cutting Circular Cold Saws from Scotchman® Industries
maximize your cutting capabilities and produce the highest quality cuts.

Cold Saws:      Home     275 Series     350 Series     350 NF Series       350 SA Series     315 HFA Series     315 RFA Series     Contact


Metal cutting circular saws from Scotchman® produce high quality cutting due to their optimal design where the material is centered under the blade instead of being placed in front of it. When cutting with the same size blades as their competitors, Scotchman® cold saw machines can cut larger profiles.

When cutting with our cold saw's double clamping feature (holding the material on both sides of the blade), the saw produces a cleaner and burr-free cut, eliminating the cost of secondary operations.

The CPO 275 series cold saw machine offers the greatest value for applications up to 3-3/8" diameter capacity.

 When using a smaller diameter blade you have:
  • More torque for greater power
  • Lower machine costs
  • Lower blade costs
  • Lower resharpening costs
    CPO 275 SERIES -       275       275 PK       275 PKPD


Manual Saw CPO 275
  • Manual clamp for material vise
  • Operator controlled trigger switch
  • Miter locking device stops 45° left, 90° and 45° right
 Manual Saw with Power
Clamp CPO 275 PK
  • Air operated clamp for material vise
  • Operator controlled trigger switch

Semi-Automatic Saw CPO 275 PKPD
  • Air operated clamp for material vise
  • Pneumatic power down feed with electric controls
  • Emergency stop button
  • Separate feed controls for rate and pressure


Material Clamp
Automatic Saw		 Control Panel

    Standard Equipment and Features of our metal cutting cold saws
  • Double Self-Centering Vise Assures Burr-Free Cuts
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Hardened and Ground Worm and Wheel Gear Box
  • Worm wheel of top quality bronze
  • 7 Gallon Coolant Tank with Pump
  • 30" Material Length Stop
  • One 10" Diameter (250 mm) HSS Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt/3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • American Made
  • Completely assembled ready for operation
 
    Maximum Capacities
Tubing
  Round
  Square
  Rectangle
Solid
  Round
  Square		 90 Degree
  3-3/8"
  3" x 3"
  3-½" x 2-3/8"
90 Degree
  1-½"
  1-½" x 1-½"		 45 Degree
  2-¾"
  2-5/8" x 2-5/8"
  2-5/8" x 2-5/8"
45 Degree
  1"
  1" x 1"


    Specifications
  • Cutting speeds-must specify when ordering
LT (Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe
  • LT 30/60 rpm
         Motor Rate:
             Low rpm 0.75 hp
             High rpm 1.5 hp
  • LT variable speed drive 15 to 90 rpm
         Motor Rate:
             Low rpm 0.75 hp
             High rpm 1.5 hp 
HT (High Turn) designed for thin wall tube and non-ferrous material
  • HT 60/120 rpm
         Motor Rate:
             Low rpm 1.6 hp
             High rpm 2 hp    
  • HT variable speed drive 30 to 150 rpm
         Motor Rate:
             Low rpm 1.6 hp
             High rpm 2 hp    
SS (Single Speed) designed for 220 V 1 ph applications
  • SS 60 rpm
         Motor Rate:   1.5 hp
  • Factory wired. Specify 230 3 PH, 460 3 PH or 575 volt 3 PH 60 hz or 220 1 PH (SS model only)
  • Maximum diameter blade - 10-¾" (275mm)
  • Arbor bore - 1-¼" (32mm)
  • Pin spacing - 2/8/45
  • Width - 21-7/8"
  • Depth - 43-½"
  • Height - not including feed handle 53-¼"
  • Height - from floor to vise 36-1/8"
  • Shipping weight - 600 lbs.

Contact Scotchman® to request additional information regarding our metal cutting cold saws.


Made in the U.S.A. Scotchman® Industries, Inc.
180 East Highway 14, P.O. Box 850     Philip, SD 57567-0850
Phone: 605.859.2542     Fax: 605.859.2499
Toll Free: 800.843.8844     Fax: 800.843.5545
Home | Metal Cutting 275 | Cold Saws 350 | Circular Saws 350 NF | Column Cold Saw 350 SA
Circular Cold Saw 315 HFA | Automatic Circular Saws 315 RFA | Privacy Statement | Contact
To see additional products, hydraulic ironworkers, band saws, advanced measuring systems and other metal fabricating equipment, go to scotchman.com. This site created and maintained By American Web Page, L.L.C. (www.awpg.com).
Copyright © 2002 - 2008. All Rights Reserved.